iPad 4 Front Glass/Digitizer Touch Panel Full Assembly

iPad 4 Front Glass/Digitizer Touch Panel Full Assembly

This product cannot be shipped to Mexico.

Este producto no puede enviarse a México.

$24.95

$24.95

We'll send a message when the product is back in stock.

Product Details

Features

Features

All-in-one fix for the 4th Gen iPad front glass panel

  • Replacement part for any shattered iPad 4th Gen front panel.
  • This part makes installing a front panel easier with the adhesive, front facing camera bracket, and blank home button already installed.
  • When performing the repair, you may damage the bezel or Wi-Fi and Bluetooth antenna. You may want to buy those parts just in case and if you don't end up using either of them, you can return them.

Assembly Components:

These come pre-installed on the front panel

Fix Kit Contents:

Compatibility

iPad 4 CDMA
16 GB LTE/CDMA (4th Gen)
32 GB LTE/CDMA (4th Gen)
64 GB LTE/CDMA (4th Gen)
iPad 4 GSM
16 GB LTE/GSM (4th Gen)
32 GB LTE/GSM (4th Gen)
64 GB LTE/GSM (4th Gen)
iPad 4 Wi-Fi
16 GB Wi-Fi (4th Gen)
32 GB Wi-Fi (4th Gen)
64 GB Wi-Fi (4th Gen)

Show 0 more devices

Repair Stories

User avatar
zedziechn's Story Photo #1137924

My Problem

My son is 5 years old. So as you can suspect, he dropped and it, shattering the corner and sending a large crack across the entirety of the screen. I bought a screen protector to cover the cracks, until he dropped it again. After the other corner was splintered, it was time.

My Fix

I followed the instructio . . .

User avatar

My Problem

Dropped my 5-year old iPad 4 onto the pavement

My Fix

The whole process went relatively well.

My Advice

If your glass is shattered or cracked anywhere near the edges, get ready to deal with lots of little pieces of glass. Work on a surface that is easy to clean. WEAR EYE PROTECTION!!! Several times, during the process . . .

User avatar

My Problem

Front glass all cracked

My Fix

Removing glass was a ##&&% and took long coming off a small piece at a time. Now that I did once it would be simple if had to do again

My Advice

Safety glasses a must

User avatar

My Problem

My daughter dropped the iPad.

My Fix

Awesome. Had originally replaced it with a cheaper glass digitizer and my daughter dropped it and cracked it again. With all the included goodies I had it opened up in about 8 minutes.

My Advice

Take your time, read through the guide before taking the unit apart and then go all in . . .

User avatar

My Problem

3 foot drop onto hardwood floor completely shattered the glass.

My Fix

I followed the directions for the most part. Due to the sheer amount of damage I didn't heat the adhesive for fear of overheating LCD or some other component. I'm not sure if this is an acual concern, but basically the glass was off othe . . .

User avatar

My Problem

After three years, my self-described clumsy wife finally dropped her iPad 4 the right way and shattered the glass screen.

My Fix

The repair was super hairy at first--as it happens, the exact spot where the guide tells you to start prying open the front panels is where my iPad's screen was utterly shattered. . . .

User avatar

My Problem

Cracked screen

My Fix

The repair went ok—a cracked screen makes the glass removal much more difficult. The main issue was reassembly and especially the home button cable. It is extremely difficult to get that back into place and, unfortunately, the tools do not make it easy.

As it stands now, the home . . .

User avatar

My Problem

I had flickering vertical grey lines accross the entire screen. I thought it could be a bad cable.

My Fix

The repair went flawlessly. Screen and cables were replaced with no issues. Unfortunately, that didn't fix the original problem. I am guessing the real issue is the graphics on the logic board.

My Advice

You have . . .

User avatar

My Problem

The Screen Was shattered

My Fix

THe repair was successful but the iOpener was not as useful as expected. Essentially it did not warm the glue of the iPad enough to remove the screen well. If doing it again I would likely use a hair dryer or heat gun to warm the iPad more and loosen the glue rather than th . . .

User avatar

My Problem

The screen had multiple cracks & the Home button was missing. Everything else worked fine, though.

My Fix

Fairly smoothly with a couple rough spots:

1. Getting the first pick under the glass took a lot more force than I expected. I ended-up being patient and having to heat the area several times as I tried . . .

Show more