MacBook Pro 13" Unibody Mid 2009 Cables
Choose Category
- All
- Accessories
- Adapters
- Batteries
- Cables
- Case Components
- Consumables
- Display Components
- Fans
- Hard Drive Brackets
- Hard Drive Enclosures
- Hard Drives
- Hard Drives (SATA)
- Keyboards
- Logic Boards
- MagSafe Boards
- Memory Maxxer Kits
- Microphones
- Optical Drives
- RAM
- Rubber Feet
- Screens
- Screws
- Software
- Speakers
- SSD Upgrade Kits
- SSDs
- Trackpads
Parts that work with MacBook Pro 13" Unibody Mid 2009:
MacBook Pro 13" Unibody (Mid 2009-Mid 2010) Hard Drive Cable
Fix an unrecognized drive in your MacBook Pro. This cable connects the hard drive to the logic board and is compatible with all Mid 2009 and Mid 2010 13" Unibody MacBook ...
Universal Drive Adapter
Turn your current hard drive into an external drive with this part.
13" Unibody LVDS Display Cable
Replace a broken or damaged LCDS display cable in your laptop.
SATA Optical Drive USB Cable
Connect an optical drive to your computer via USB with this part.
Apple AC Adapter (3-prong) Extension Cable
Replace a broken or damaged six foot Apple three-prong AC adapter extension cable with this part.
MacBook Pro 13" Unibody (A1278 Mid 2009-Mid 2010) SATA SuperDrive Cable
This cable connects the SuperDrive to the logic board.
Device Info
With the Mid 2009 model 13 inch MacBook Pro Unibody laptop, Apple brought back the Firewire 800 port, added an SD card slot, and increased the processor speed.
The most common repairs with the MacBook Pro 13" Unibody for Mid 2009 are replacing a dead battery or upgrading the hard drive or RAM. The MacBook Pro 13" Unibody (Mid 2009) Memory Maxxer RAM Upgrade Kit includes all the parts and tools you need to upgrade to 8 GB of RAM.
The MacBook Pro 13" Unibody for Mid 2009 requires a Tri-point Y0 Screwdriver to remove the battery. The battery kit includes all the needed tools.
Once you've bought your parts and tools, check out iFixit's MacBook Pro 13" Unibody for Mid 2009 repair guides for step-by-step instructions on how to make the fix.