MacBook Pro 13" Retina Late 2012
Arctic Silver Thermal Paste
3.5 gram Arctic Silver thermal paste tube. Thermal paste forms a continuous, conductive layer between a processor and its heat sink, improving cooling performance and kee...
MacBook Pro Retina Plastic Feet
Replace missing or damaged black plastic feet on the lower case of your 13" or 15" Retina Display MacBook Pro model numbers A1425, 1502, and A1398.
Arctic Silver ArctiClean
Two part thermal paste remover. Two part cleaner used to dissolve thermal paste and purify the surfaces of heat sinks and processors before applying new thermal paste. In...
MacBook Pro 13" Retina (Late 2012/Early 2013) Battery
Replacement 6600 mAh battery for MacBook Pro 13" Retina (Late 2012/Early 2013)
Silicone 2.5" Hard Drive Enclosure with USB 2.0 Cable
External silicone hard drive enclosure for SATA laptop drives
Universal Drive Adapter
Transform any bare hard drive (SATA or IDE) into an external storage solution. Compatible with all G3 Lombard and Pismo PowerBooks, all G4 PowerBooks, all iBooks, all Mac...
MacBook Pro 13" Retina (Late 2012/Early 2013) Lower Case Screw Set
Replace the external screws securing the lower case.
G4/MagSafe AC Adapter End
2-pronged tip of square G4 or MagSafe adapter
MacBook Pro 13" Retina (Late 2012 - Early 2013) Trackpad
Replace a malfunctioning or scratched trackpad in a Late 2012 or Early 2013 A1425 model 13" MacBook Pro with Retina display.
MacBook Pro 13" Retina (Late 2012) 2.5 GHz Logic Board
The 2.5 GHz Core i5 motherboard includes these ports: 2 Thunderbolt (Mini DisplayPort), USB 3.0.
On October 23, 2012 Apple announced the new 13" MacBook Pro with Retina display. Similar to its larger cousin, the 15" MacBook Pro with Retina display introduced earlier in 2012, this new 13" MacBook Pro features a high resolution LED-backlit display. An integrated Intel HD Graphics 4000 graphics processor takes full advantage of the 2560-by-1600 resolution at 227 pixels per inch. The MBP Retina 13" has two USB 3 ports, an SDXC card slot, an HDMI port, and two ThunderBolt ports. It does not have Ethernet or Firewire ports, although adapters are available. The MagSafe Port has also been replaced with the MagSafe 2 port allowing for a thinner case design.
The battery in a MacBook Pro 13" Retina Late 2012 is adhered to the inside of the upper case. Our battery repair kits include the needed adhesive.
The MacBook Pro 13" Retina Display models require a P5 Pentalobe Screwdriver to remove the the lower case to begin any internal repairs. Our battery kits include all the needed tools.
Once you've bought your parts and tools, check out iFixit's MacBook Pro 13" Retina Display Late 2012 repair guides for step-by-step instructions on how to make the fix.
The MacBook Pro 13" Retina Display Late 2012 earned a 2 out of 10 in iFixit's repairability assessment.