Menu
Your Settings
Cancel
This product is not available in your country.
Item Code: IF300-092-1
This product is not available in your country.
Condition: Used
$19.99
iFixit Pro discount applied. Reg:
$19.99
A-Stock used parts are in excellent condition
B-Stock parts have minor cosmetic wear
C-Stock parts have major cosmetic wear but are fully functional
$19.99
iFixit Pro discount applied. Reg:
$19.99
Out of Stock
Ready to Ship
Out of Stock
Ready to Ship
We don't have that much stock available
Product Details
Description
Description
Replace most of the internal electronics for a GoPro Hero4 Black action camera.
Repair Stories
Unit would not power on or charge
Smooth except for plugging the smaller ribbon cable back in. That is short and there is little room for small pliers
Do not try to pull the three wire plug straight out. Follow the guide and push down on it. There are pins keeping it from being pulled straight out. For the narrow ribbon cable, use a very thin pliers or straighten it out and push the motherboard down on it while bracing the back of the ribbon with a narrow screwdriver to keep it from bending. It took me quite a number of tried to get it to slip in
Unit would not power on or charge
Smooth except for plugging the smaller ribbon cable back in. That is short and there is little room for small pliers
Do not try to pull the three wire plug straight out. Follow the guide and push down on it. There are pins keeping it from being pulled straight out. Fo . . .
Had a chip in the lens and microphone issues. Reached out to GoPro and they wouldn't repair, they offered me 20% towards a new go pro but they wanted my GoPro.
Thanks to iFixIt for stocking the parts reasonably priced was able to drop the mother board assembly in without an issue and my GoPro is revived!
Use tweasers to connect the tiny ribbon cable. I did not have them with me, if I did the repair wouldve been a lot quicker.
Had a chip in the lens and microphone issues. Reached out to GoPro and they wouldn't repair, they offered me 20% towards a new go pro but they wanted my GoPro.
Thanks to iFixIt for stocking the parts reasonably priced was able to drop the mother board assembly in without an issue and my GoPro is revi . . .
