Xbox 360 Jasper
Arctic Silver Thermal Paste
3.5 gram Arctic Silver thermal paste tube. Thermal paste forms a continuous, conductive layer between a processor and its heat sink, improving cooling performance and kee...
Arctic Silver ArctiClean
Two part thermal paste remover. Two part cleaner used to dissolve thermal paste and purify the surfaces of heat sinks and processors before applying new thermal paste. In...
Xbox 360 Red Ring of Death Fix Kit
Fix kit for Xbox 360 consoles with the "Red Ring of Death" (RRoD) failure. Replace, reattach, and reclamp the heat sinks on your Xbox 360. Usually fixes a RRoD Xbox—als...
Xbox 360 HDD
Replace the hard drive with its plastic and metal hard drive enclosure that snaps onto the the Xbox 360 console.
Xbox 360 Optical Drive SATA Cable
This short black SATA cable transfers data between the motherboard and optical drive.
Xbox 360 Wireless Controller Motherboard
Replace the main circuit board assembly for the Xbox 360 Wireless Controller.
Xbox 360 Upper Case
Replace the plastic outer casing covering the top half of the Xbox 360.
Xbox 360 Wireless Controller Battery Enclosure
The battery enclosure holds two AA batteries and snaps into the back of the controller. Batteries are not included.
Xbox 360 Lower Case
Replace the plastic outer casing covering the lower half of the Xbox 360.
Xbox 360 X Clamps
Replace the two X clamps for securing the CPU and GPU heat sinks.
The Xbox 360 Jasper revision was released in late 2008. This revision features CPU and GPU chips both manufactured with a 65 nanometer process. Thanks to the power reduction from the improved electronics, this revision of the Xbox 360 only requires a 150 watt power supply.