Installing iPod Touch 5th Generation Rear-Facing Camera

You're viewing a previously published version of this guide. View latest version

Jul 31, 2013 - 05:13:51

May 07, 2024 - 08:27:33 Sep 04, 2013 - 05:39:05 Jul 31, 2013 - 05:13:51 Feb 13, 2013 - 08:46:42 Dec 06, 2012 - 04:14:45 Dec 06, 2012 - 03:53:53 Dec 06, 2012 - 03:53:44 Nov 29, 2012 - 11:57:44 Nov 29, 2012 - 11:46:05 Nov 27, 2012 - 05:30:56 Nov 27, 2012 - 01:05:13 Nov 26, 2012 - 05:42:19 Nov 26, 2012 - 05:41:42 Nov 26, 2012 - 05:40:52 Nov 26, 2012 - 05:31:45 Nov 26, 2012 - 05:02:42 Nov 26, 2012 - 05:02:41 Nov 26, 2012 - 04:58:48 Nov 26, 2012 - 04:50:44 Nov 26, 2012 - 04:50:42 Nov 26, 2012 - 04:40:54 Nov 19, 2012 - 04:23:14 Nov 19, 2012 - 04:23:12 Nov 19, 2012 - 04:15:20 Nov 19, 2012 - 04:15:19 Nov 19, 2012 - 04:14:10 Nov 19, 2012 - 04:11:01 Nov 19, 2012 - 04:11:00 Nov 19, 2012 - 04:07:33 Nov 19, 2012 - 04:07:31 Nov 19, 2012 - 03:36:53 Nov 19, 2012 - 03:36:52 Nov 19, 2012 - 03:11:59

Newer

Introduction

Prerequisite for entire button ribbon cable, volume buttons, power button, and rear case.

What you need

Step 1 Rear-Facing Camera

Installing iPod Touch 5th Generation Rear-Facing Camera, Rear-Facing Camera: step 1, image 1 of 3

Installing iPod Touch 5th Generation Rear-Facing Camera, Rear-Facing Camera: step 1, image 2 of 3

Installing iPod Touch 5th Generation Rear-Facing Camera, Rear-Facing Camera: step 1, image 3 of 3

Insert the flat end of a spudger between the rear-facing camera and its frame.
Gently twist the spudger to free the camera.
Lift the rear-facing camera up out of its socket, and remove it from the iPod Touch.

Step 2

Installing iPod Touch 5th Generation Rear-Facing Camera: step 2, image 3 of 3

Gently slide the flat end of a spudger underneath the piece of foam tape covering the button ribbon cable.
Run the spudger along the full length of the tape to disconnect it from the rear case.

Step 3

Peel and remove the foam tape from the rear case of the iPod.

Step 4

Installing iPod Touch 5th Generation Rear-Facing Camera: step 4, image 3 of 3

Use the tip of a spudger to peel up the edge of the tape covering the button ribbon cable.
Use tweezers or your fingers to peel the tape up from the rear case, and remove it from the iPod.