Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Use this guide to remove or replace the two screws securing the iPhone XS Max display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

Parts

No parts specified.

  1. Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured. Power off your iPhone before beginning disassembly.
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

  2. Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now

    Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now

Jeff Suovanen

Member since: 08/06/2013

253,177 Reputation

216 Guides authored

Team

iFixit Member of iFixit

Community

108 Members

9,431 Guides authored

View Statistics:

Past 24 Hours: 6

Past 7 Days: 29

Past 30 Days: 164

All Time: 2,037