Skip to main content

Introduction

Prerequisite only.

Parts

No parts specified.

  1. Remove the two screws securing the barometric vent to the rear case:
    • Remove the two screws securing the barometric vent to the rear case:

    • One 2 mm Phillips screw

    • One 1.8 mm Phillips screw

  2. Gently push the barometric vent in the direction of the battery to separate the adhesive securing the vent to the bottom edge of the iPhone. Gently push the barometric vent in the direction of the battery to separate the adhesive securing the vent to the bottom edge of the iPhone.
    • Gently push the barometric vent in the direction of the battery to separate the adhesive securing the vent to the bottom edge of the iPhone.

  3. Remove the barometric vent.
    • Remove the barometric vent.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Member since: 01/03/2018

188,830 Reputation

432 Guides authored

Team

iFixit Member of iFixit

Community

146 Members

17,220 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 42