Introduction
Apple has substituted the two bottom Phillips screws near the dock connector with 5-point "Pentalobular" screws.
This guide will illustrate how to replace the Pentalobe screws with good ol' regular Phillips screws.
What you need
-
-
Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
46 other people completed this guide.
2 Comments
ok but why would anyone need this-
Hi Tristan!
This was back in the day when Pentalobe screws were new and controversially proprietary. iFixit sold kits that replaced the screws with common Phillips screws as a gesture towards reparability. Now, Pentalobe screws are considered common, so this guide is not as useful anymore.
Extremely difficult.
Sean - Lua Tech - Reply