What you need
-
-
-
Use your fingers to place the LiDAR module in its recess and gently press it in place.
Ask FixBot
-
-
-
-
Install the two LiDAR cover screws:
-
One 1.7 mm‑long JIS 00 screw
-
One 4.8 mm‑long standoff screw
-
-
-
Use tweezers to place the left logic board buffer in its recess.
-
-
-
Use a JIS 00 screwdriver to install the two 1.8 mm‑long left logic board buffer screws.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
