iPhone 16 Pro Max LiDAR Sensor Installation - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

Installation steps for the LiDAR sensor in the iPhone 16 Pro Max.

What you need

1. Step 1 Install the LiDAR sensor
  Lay the LiDAR sensor in its recess.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 2
  Use a Phillips screwdriver to install the two screws securing the LiDAR sensor:
  
  One 1.6 mm‑long screw
  
  One 2.9 mm‑long screw
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3
  Use your finger or a spudger to press and connect the LiDAR sensor connector to the logic board.
  
  To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Finish Line

Cancel: I did not complete this guide.

Author

Arthur Shi

Member since: 01/03/18

350,784 Reputation

938 Guides authored

+52 more badges

Team

iFixit Member of iFixit

Staff

122 Members

72,401 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 11

All Time: 139