Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.
Introduction
Go to step 1 ↓Prerequisite only. This guide shows how to disconnect the iPad Pro's display assembly.
What you need
Tools
-
-
Spudger4.9
-
-
-
Use a Phillips screwdriver to remove the three 1.3 mm Phillips screws securing the display cable bracket.
-
-
-
-
Use the flat end of the spudger to disconnect the display assembly connector from the motherboard socket.
-
-
To reassemble your device, follow these instructions in reverse order.