iPad 3 4G Front Panel Assembly Replacement

You're viewing a previously published version of this guide. View latest version

Oct 28, 2015 - 08:05:26

May 13, 2019 - 11:58:20 Oct 28, 2015 - 08:05:26 Oct 28, 2015 - 08:05:26 Oct 28, 2015 - 08:05:26 Oct 28, 2015 - 08:05:26 Sep 04, 2013 - 05:25:39 Jul 31, 2013 - 04:42:13 Oct 17, 2012 - 03:12:55 Oct 17, 2012 - 02:19:32 Oct 17, 2012 - 02:19:25 Oct 17, 2012 - 02:19:11 Oct 17, 2012 - 02:19:07 Oct 17, 2012 - 02:18:54 Oct 17, 2012 - 02:18:51 Oct 12, 2012 - 05:36:54 Oct 12, 2012 - 05:36:53 Oct 12, 2012 - 05:35:54 Oct 12, 2012 - 05:35:52 Oct 12, 2012 - 05:35:10

Newer

What you need

Step 1 Front Panel Assembly

iPad 3 4G Front Panel Assembly Replacement, Front Panel Assembly: step 1, image 1 of 1

Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame.

Step 2

iPad 3 4G Front Panel Assembly Replacement: step 2, image 3 of 3

Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.
Rotate the LCD along its left edge and lay it down on top of the front panel.
Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.