Skip to main content

Fix Your Stuff

Right to Repair

Store

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

prerequisite guide, hard drive removal

Parts

No parts specified.

  1. Pull straight up on the SATA data/power cable to disconnect it from the drive. Pull straight up on the SATA data/power cable to disconnect it from the drive.
    • Pull straight up on the SATA data/power cable to disconnect it from the drive.

  2. Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.
    • Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.

  3. Grab the hard drive and left hard drive bracket together. Tilt the left side up away from the rear case, and slide the assembly to the left. Remove the hard drive and left hard drive bracket from the iMac.
    • Grab the hard drive and left hard drive bracket together.

    • Tilt the left side up away from the rear case, and slide the assembly to the left.

    • Remove the hard drive and left hard drive bracket from the iMac.

  4. Remove the left hard drive bracket. Remove the left hard drive bracket.
    • Remove the left hard drive bracket.

Andrew Optimus Goldheart

Member since: 10/17/2009

470,681 Reputation

410 Guides authored

Team

iFixit Member of iFixit

Community

134 Members

15,617 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 414