iMac Intel 27" EMC 2546 Hard Drive

You're viewing a previously published version of this guide. View latest version

Dec 01, 2017 - 05:17:00

Dec 21, 2017 - 12:13:52 Dec 01, 2017 - 05:17:00 Dec 01, 2017 - 04:41:27 Dec 01, 2017 - 04:40:48 Nov 12, 2015 - 08:48:41 Nov 12, 2015 - 08:48:41 Nov 12, 2015 - 08:48:27 Nov 12, 2015 - 08:47:49 Nov 12, 2015 - 08:47:34 Nov 12, 2015 - 08:47:21 Nov 18, 2013 - 08:56:49 Sep 04, 2013 - 05:26:50 Jul 31, 2013 - 04:45:09 Jul 15, 2013 - 10:12:47 Jul 15, 2013 - 10:09:28 Jul 15, 2013 - 10:09:18 Jul 12, 2013 - 11:41:35 Jul 12, 2013 - 11:41:21 Jul 12, 2013 - 11:41:12 Jul 12, 2013 - 11:39:53 Jul 12, 2013 - 09:56:23 Jul 11, 2013 - 04:40:02 Jul 11, 2013 - 03:45:40 Jul 11, 2013 - 03:45:36 Jul 11, 2013 - 12:31:44 Jul 10, 2013 - 04:48:13 Jul 09, 2013 - 09:50:58 Jul 09, 2013 - 09:48:04 Jul 09, 2013 - 09:46:52 Jul 09, 2013 - 09:25:29 Jul 09, 2013 - 09:25:17 Jul 09, 2013 - 09:20:37 Jul 09, 2013 - 09:19:43 Jul 09, 2013 - 09:18:58 Jul 09, 2013 - 09:17:08 Jul 09, 2013 - 09:17:00 Jul 09, 2013 - 09:16:49 Jul 09, 2013 - 09:16:34 Jul 09, 2013 - 09:16:17 Jul 09, 2013 - 09:14:38

Newer

Introduction

prerequisite guide, hard drive removal

What you need

Step 1 Hard Drive

iMac Intel 27" EMC 2546 Hard Drive, Hard Drive: step 1, image 1 of 2

iMac Intel 27" EMC 2546 Hard Drive, Hard Drive: step 1, image 2 of 2

Pull straight up on the SATA data/power cable to disconnect it from the drive.

Step 2

Remove two 7.3 mm T10 screws securing the left hard drive bracket to the rear case.

Step 3

iMac Intel 27" EMC 2546 Hard Drive: step 3, image 3 of 3

Grab the hard drive and left hard drive bracket together.
Tilt the left side up away from the rear case, and slide the assembly to the left.
Remove the hard drive and left hard drive bracket from the iMac.