Introduction

If the hook end (male end) of your buckle is broken, it’s easy to replace. We’ll show you how in just a few easy steps.

Parts

  1. In order to determine the correct buckle size, measure the webbing. The webbing illustrated here is 15 mm, so you would need a 15 mm buckle.
    • In order to determine the correct buckle size, measure the webbing. The webbing illustrated here is 15 mm, so you would need a 15 mm buckle.

  2. Remove the broken buckle from the webbing by first pulling the webbing through the locking strap and then unthreading it from the buckle.
    • Remove the broken buckle from the webbing by first pulling the webbing through the locking strap and then unthreading it from the buckle.

    • Use a screwdriver or tweezers to help pull the webbing through, if necessary.

Conclusion

Follow the instructions in reverse order to finish your repair.

One other person completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

VAUDE Reparaturteam

Member since: 02/22/2016

5,249 Reputation

31 Guides authored

Team

Vaudesport Member of Vaudesport

Community

3 Members

62 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 14

Past 7 Days: 68

Past 30 Days: 266

All Time: 6,245