Fix Your Stuff Community Store

Toro Cement Mixer 68009HD 2018 Tub Replacement

Introduction

This guide shows how to remove and replace the tub for the Toro Cement Mixer 68009HD.

Warning: The tub is extremely heavy and requires at least two people to lift it. Be sure to practice safe lifting techniques.

What you need

  1. Toro Cement Mixer 68009HD 2018 Tub Replacement, Safety precautions: step 1, image 1 of 2 Toro Cement Mixer 68009HD 2018 Tub Replacement, Safety precautions: step 1, image 2 of 2

    • Before you begin, press the engine-stop switch to turn off the engine.

    Edit

  2. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 2, image 1 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 2, image 2 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 2, image 3 of 3

    • Unlatch the three rubber straps securing the cowl.

    Edit

  3. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 3, image 1 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 3, image 2 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 3, image 3 of 3

    • Swing the cowl up until it rests securely on the frame.

    Edit

  4. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 4, image 1 of 2 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 4, image 2 of 2

    • Slide the fuel cutoff lever to the left to cut the fuel supply to the engine.

    Edit

  6. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 5, image 1 of 2 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 5, image 2 of 2

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    Edit

  7. Toro Cement Mixer 68009HD 2018 Tub Replacement, Remove the tub: step 6, image 1 of 2 Toro Cement Mixer 68009HD 2018 Tub Replacement, Remove the tub: step 6, image 2 of 2

    • Pull up on the brake lever to disengage the brake.

    Edit

  8. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 7, image 1 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 7, image 2 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 7, image 3 of 3

    • Rotate the tub until the yoke and dish assembly sit directly below the tub.

    Edit

  9. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 8, image 1 of 2 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 8, image 2 of 2

    • Push down on the brake lever to re-engage the brake.

    • Make sure that the brake is fully engaged.

    Edit

  10. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 9, image 1 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 9, image 2 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 9, image 3 of 3

    • Use a 3/4 inch socket to remove the six nuts securing the tub to the dish.

    Edit

  11. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 10, image 1 of 1

    • Remove the six drum clamp plates from the tub mounting points.

    Edit

  12. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 11, image 1 of 1

    • Lift the tub up slightly by the gear ring to loosen the tub from the dish.

    Edit

  13. Toro Cement Mixer 68009HD 2018 Tub Replacement: step 12, image 1 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 12, image 2 of 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: step 12, image 3 of 3

    • The tub is extremely heavy and requires at least two people to lift it. Be sure to practice safe lifting techniques.

    • Lift the tub straight up from the dish and remove it from the device.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Arthur Shi

Member since: 01/03/18

254,546 Reputation

529 Guides authored

Badges: 47

+44 more badges

Team

iFixit Member of iFixit

Staff

136 Members

17,420 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 7

All Time: 239