Skip to main content

Introduction

If you need to replace the button cell battery of your TomTom Go 60 S, use this guide. After removing the covering for the device, the button cell battery will be located underneath the motherboard. It is important for retaining the information system vital to operation of the device.

  1. Use the iFixit opening tool to pry open the TomTom Go 60 S.  Start from a corner and drag the tool around the device.
    • Use the iFixit opening tool to pry open the TomTom Go 60 S. Start from a corner and drag the tool around the device.

  2. Disconnect the screen from the motherboard by removing the yellow ribbon connector from the socket.
    • Disconnect the screen from the motherboard by removing the yellow ribbon connector from the socket.

  3. Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now

    Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now
  4. Remove all six screws from the motherboard with a Philips #000 screwdriver.
    • Remove all six screws from the motherboard with a Philips #000 screwdriver.

  5. Disconnect the two battery ribbon cables from the motherboard. Disconnect the two battery ribbon cables from the motherboard.
    • Disconnect the two battery ribbon cables from the motherboard.

  6. Remove the button cell battery from outer casing to remove battery. Remove the button cell battery from outer casing to remove battery.
    • Remove the button cell battery from outer casing to remove battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Tomy Peralta

Member since: 10/04/2016

118 Reputation

3 Guides authored

Team

USF Tampa, Team 1-6, Nance Fall 2016 Member of USF Tampa, Team 1-6, Nance Fall 2016

USFT-NANCE-F16S1G6

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 8

All Time: 728