Installing Sony Ericsson s710a SIM Card

You're viewing a previously published version of this guide. View latest version

Dec 14, 2011 - 12:25:23

Jan 28, 2014 - 02:46:10 Jul 31, 2013 - 05:17:26 Dec 14, 2011 - 12:25:23 Dec 13, 2011 - 03:12:35 Dec 13, 2011 - 06:42:23 Dec 13, 2011 - 06:40:36 Nov 30, 2011 - 08:19:18 Nov 30, 2011 - 08:19:12 Nov 30, 2011 - 08:02:02 Nov 30, 2011 - 08:01:59 Nov 30, 2011 - 08:00:47 Nov 30, 2011 - 08:00:45 Nov 30, 2011 - 07:58:15 Nov 30, 2011 - 07:58:13 Nov 30, 2011 - 07:57:42 Nov 30, 2011 - 07:57:40 Nov 30, 2011 - 07:51:34 Nov 30, 2011 - 07:51:32 Nov 30, 2011 - 07:47:19 Nov 30, 2011 - 07:47:17 Nov 30, 2011 - 07:27:52

Newer

Introduction

This is a GSM phone originally introduced by AT&T. The SIM card will likely be an AT&T card; however, when in foreign countries, other SIM cards can be inserted into the phone for compatibility with foreign carriers.

Step 1 SIM Card

Installing Sony Ericsson s710a SIM Card, SIM Card: step 1, image 1 of 1

Slide the battery cover off by pushing it away from the camera side of the device.
This may require a good amount of force.

Step 2

Next remove the battery
Lift it out of the phone using the tab on the battery (marked in the image)

Step 3

The SIM card holder is now exposed (marked in image).
This will likely already have an existing SIM card in it if the phone has been previously used.
To open this, slide the holder upward (assuming the same orientation as in the image)

Step 4

The holder will then hinge open.
You are now able to insert a new SIM card.

Step 5

Insert the new SIM card in the orientation shown.
This is important, as the phone will not work if the metal contacts on the care are not properly aligned with the contacts on the phone.