Introduction

How to replace the LCD screen from the Sony Cyber-shot DSC-W510.

Image 1/1:
  • Place the Sony Cyber-shot DSC-W510 on the magnetic project mat. This will help keep the small screws organized.

Add Comment

Image 1/2: There are five screws on the bottom of the camera and two on the side. Image 2/2: If the screws are stripped, visit the [guide|13213|Removing a Stripped Screw Guide].
  • Using the Phillips #00 screwdriver, unscrew the outside screws from the frame of the camera.

  • There are five screws on the bottom of the camera and two on the side.

  • If the screws are stripped, visit the Removing a Stripped Screw Guide.

Add Comment

Image 1/2: It may be necessary to start by prying at one end of the screen and moving around the edge of the screen frame, until it pops out. Image 2/2: It may be necessary to start by prying at one end of the screen and moving around the edge of the screen frame, until it pops out.
  • Pry open the screen frame using a plastic opening tool.

  • It may be necessary to start by prying at one end of the screen and moving around the edge of the screen frame, until it pops out.

Add Comment

Image 1/2: Image 2/2:
  • Using the screw driver, unscrew the one screw on the control panel board.

Add Comment

Image 1/1:
  • Gently unplug the control panel from the motherboard outlet.

Add Comment

Image 1/2: Gently unplug the LCD screen from the motherboard. Image 2/2: Gently unplug the LCD screen from the motherboard.
  • Using your hands, pry open the LCD screen from the metal board.

  • Gently unplug the LCD screen from the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

kyle

Member since: 02/05/2015

361 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 12

All Time: 435