Sol Republic Deck Play/Pause Button Replacement

You're viewing a previously published version of this guide. View latest version

Dec 22, 2015 - 02:25:08

Dec 22, 2015 - 02:25:08 Dec 22, 2015 - 02:24:43 Dec 22, 2015 - 02:10:47 Dec 22, 2015 - 01:13:56 Dec 22, 2015 - 01:13:54 Dec 22, 2015 - 01:13:38 Dec 01, 2015 - 08:54:02 Nov 17, 2015 - 09:31:18 Nov 17, 2015 - 09:29:52 Nov 16, 2015 - 03:42:37 Nov 16, 2015 - 03:42:20 Nov 15, 2015 - 06:10:18 Nov 15, 2015 - 06:09:43 Nov 15, 2015 - 05:35:56 Nov 15, 2015 - 05:14:31 Nov 15, 2015 - 05:08:24 Nov 15, 2015 - 05:07:42 Nov 15, 2015 - 04:50:50 Nov 15, 2015 - 04:47:05 Nov 03, 2015 - 04:35:31 Nov 03, 2015 - 04:29:49 Nov 03, 2015 - 04:29:27 Nov 03, 2015 - 04:28:30 Nov 03, 2015 - 04:28:07 Nov 03, 2015 - 04:25:56 Nov 03, 2015 - 04:20:27 Nov 03, 2015 - 04:19:37

Newer

Introduction

There is a play/pause button with an "M" on it located on the front cover of the speaker beneath the letters SOL. This button controls the starting and stopping of the music.

What you need

Step 1 Play/Pause Button

Sol Republic Deck Play/Pause Button Replacement, Play/Pause Button: step 1, image 1 of 3

Sol Republic Deck Play/Pause Button Replacement, Play/Pause Button: step 1, image 2 of 3

Sol Republic Deck Play/Pause Button Replacement, Play/Pause Button: step 1, image 3 of 3

When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.
Pry the front face plate from the bottom half of the speaker by inserting the spudger edge into the the middle groove.
Insert another spudger into the middle groove to hold the front plate up as you separate both plates on all sides. Use multiple opening tools to keep plates separated if necessary.