Samsung RF28R7201SG Refrigerator Control Panel Replacement

Introduction

This guide shows how to remove and replace the control panel in your Samsung RF28R7201SG refrigerator.

The control panel contains the buttons to change the refrigerator settings, as well as a display for current settings. The panel can become damaged and inoperative from prolonged moisture exposure.

What you need

Step 1 Unplug your refrigerator

Samsung RF28R7201SG Refrigerator Control Panel Replacement, Unplug your refrigerator: step 1, image 1 of 1

Unplug your refrigerator before you begin your repair.

Edit

Step 2 Open the refrigerator doors

Samsung RF28R7201SG Refrigerator Control Panel Replacement, Open the refrigerator doors: step 2, image 1 of 2

Samsung RF28R7201SG Refrigerator Control Panel Replacement, Open the refrigerator doors: step 2, image 2 of 2

Open both French doors for the refrigerator compartment.

Edit

Step 3 Loosen the control panel

Samsung RF28R7201SG Refrigerator Control Panel Replacement, Loosen the control panel: step 3, image 1 of 3

Samsung RF28R7201SG Refrigerator Control Panel Replacement, Loosen the control panel: step 3, image 2 of 3

Samsung RF28R7201SG Refrigerator Control Panel Replacement, Loosen the control panel: step 3, image 3 of 3

The control panel has plastic clips around its perimeter that secure it to the refrigerator wall.
Insert a spudger into the seam along the right edge of the control panel.
You can also use a flathead screwdriver, but be careful not to let the screwdriver slip, or you'll scratch your refrigerator surface.
Press the spudger in firmly and pry to loosen the panel.
Use your spudger to slide and pry around the control panel to loosen it from the refrigerator wall.