Samsung Galaxy Tab S2 9.7 AT&T Screen Replacement

Step 1 Screen



• Apply the heat gun around the edges of the tablet to melt the adhesive glue.
• Do not allow the gun to remain still for more than two seconds, so that you do not melt the plastic around the screen.
• If you do not have access to a heat gun, you may also use an iOpener or a hair dryer. Refer to the iOpener guide for extra help.
Step 2



• Apply the suction to the bottom or top right corner.
• Use the plastic opening tool at several points around the screen while the suction is being applied to pop the screen out.
Step 3
• Once the screen is detached, open the tablet like a book.
• Gently open the tablet, and do not pull the pieces apart since you can risk damaging the orange ribbon cable.
Step 4
• Using the precision tweezers, remove the silver tape that is holding the orange ribbon cable connecting the two pieces.
Step 5
• Using the precision tweezers, remove the small press-fit connector from the body of the tablet.

Author

with 4 other contributors

Joy Harris

Member since: 02/15/17

814 Reputation

7 Guides authored

Badges: 15

• 
• 
• 

+12 more badges

Team

USF Tampa, Team S3-G4, Sullivan Spring 2017 Member of USF Tampa, Team S3-G4, Sullivan Spring 2017

USFT-SULLIVAN-S17S3G4

3 Members

14 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview