Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

  1. Remove back cover.
    • Remove back cover.

  2. Remove battery. If you have SIM card and SD card in, remove them by the way.
    • Remove battery. If you have SIM card and SD card in, remove them by the way.

  3. Open this cover and release the home button flex connector. Open this cover and release the home button flex connector.
    • Open this cover and release the home button flex connector.

  4. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  5. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker.
    • Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker.

  6. Remove the LCD screen from rear case. Remove the LCD screen from rear case.
    • Remove the LCD screen from rear case.

  7. Remove all the screws. Remove all the screws.
    • Remove all the screws.

  8. Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing. Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing.
    • Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing.

  9. Twist off these two screws and remove the whole motherboard assembly. Twist off these two screws and remove the whole motherboard assembly.
    • Twist off these two screws and remove the whole motherboard assembly.

  10. Release the connector,loose the assembly from adhesive and remove it finally. Release the connector,loose the assembly from adhesive and remove it finally. Release the connector,loose the assembly from adhesive and remove it finally.
    • Release the connector,loose the assembly from adhesive and remove it finally.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Sophia

Member since: 03/25/2014

42,791 Reputation

62 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 4

Past 30 Days: 17

All Time: 4,751