Introduction
Prereq guide only! Removes the top midframe, which includes the charging coil, for the Samsung Galaxy S10+.
What you need
-
-
Remove the nine 4 mm Phillips screws securing the top midframe to the phone.
-
-
-
-
Lift the midframe from the top corners and remove it from the phone.
-
Align the midframe's top edge to the phone and lay the frame down on the phone.
-
Use fingers to apply pressure along the midframe perimeter to snap the midframe clips back into place. The edges should sit flush against the phone edge.
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
