Step 1 Midframe



• Remove back cover really easily as usual.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2



• Take away the 3200mAh battery, SIM card and S Pen.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Remove 16 screws all together. Be patient.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Cut the adhesive sticker along the side of middle housing. Notice: There is no need to separate the LCD screen from mid-plate. So just cut the sticker along side and get the front assembly loosen. Don't do anything else here.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Loosen the clasp around battery slot.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Push the front assembly out from middle housing with effort and separate them. Find comfortable force point to push. You can start it from top side especially left corner seen from back.
• Finally remove the middle housing.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-35113" src="https://www.ifixit.com/Guide/embed/35113/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-35113"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/35113" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview