Introduction

Follow this guide to remove or replace the rear cover for your Samsung Galaxy J3.

Parts

No parts required.

  1. Insert a fingernail or the flat end of a spudger into the divot to the left of the rear-facing camera. Gently pry the rear cover away from the phone until all the plastic clips holding the cover are released.
    • Insert a fingernail or the flat end of a spudger into the divot to the left of the rear-facing camera.

    • Gently pry the rear cover away from the phone until all the plastic clips holding the cover are released.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Remove the rear cover.
    • Remove the rear cover.

    • To reinstall the rear cover, align it to the back of the phone, and squeeze the perimeter of the phone to snap all the clips into place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Member since: 01/03/2018

37,168 Reputation

117 Guides authored

Team

iFixit Member of iFixit

Community

109 Members

7,736 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 7

Past 7 Days: 31

Past 30 Days: 127

All Time: 127