Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

Safety Precautions

Views: 146

View statistics:

Past 24 Hours:
0
Past 7 Days:
1
Past 30 Days:
6
All Time:
146
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: No estimate
Difficulty: Moderate
Prerequisite Only

This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Safety Precautions

Introduction

Go to step 1 ↓

Prerequisite guide—follow these safety steps before you work on the Classen Over Seeder TS20HD.

What you need

    1. Safety Precautions, Safety precautions: step 1, image 1 of 2 Safety Precautions, Safety precautions: step 1, image 2 of 2
      • Before you begin, ensure that the machine is powered down and cool to the touch.

      • Disconnect the spark plug to prevent the engine from accidentally starting up during service:

      • Grab the plastic housing at the end of the spark plug wire.

      • Pull firmly to disconnect the wire from the spark plug.

      Ask FixBot

      Add Comment

    2. Safety Precautions: step 2, image 1 of 1
      • To prevent the over seeder from rolling during service, place wheel chocks behind a rear wheel.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Arthur Shi

Member since: 01/03/18

353,975 Reputation

938 Guides authored

Team

iFixit Member of iFixit

Staff

119 Members

72,954 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 146