Fix Your Stuff Community Store

Replacement of the back panel on Dell XPS 13 9380

Introduction

You need to open or replace your Dell XPS 13 9380 back panel, this guide is for you!

What you need

  1. Replacement of the back panel on Dell XPS 13 9380, Remove the back panel: step 1, image 1 of 3 Replacement of the back panel on Dell XPS 13 9380, Remove the back panel: step 1, image 2 of 3 Replacement of the back panel on Dell XPS 13 9380, Remove the back panel: step 1, image 3 of 3

    • Before you begin, be sure to turn off your laptop and unplug it from the outlet.

    • Use a Torx T5 driver to unscrew the eight screws securing the back panel.

    • Use a spudger to pry up and loosen the back panel.

    • Lift the back panel up slightly from the non-hinged edge.

    • Pull the back panel away from the hinged edge, wiggling it back and forth to loosen the clips.

    • When the back panel clips are free, remove the back panel.

    Translate
Conclusion

To reassemble your device, follow the instructions in reverse order.

One other person completed this guide.

Special thanks to these translators:

fr en

100%

Arthur Shi

Schwarzer

Egnis H

These translators are helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

Schwarzer

Member since: 08/07/19

4,844 Reputation

13 Guides authored

Badges: 34

+31 more badges

Team

i.Fixit FR Team Member of i.Fixit FR Team

Community

3 Members

40 Guides authored

One Comment

The torx bit used is a T5, the screw is an m2x3 — if you’re buying a kit you want the T5 torx bit

swosse - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 64

All Time: 4,454