This translation may not reflect the most recent updates from the source guide. Help update the translation or view the source guide.
Introduction
Prerrequisitos para remover el Conector Lightning.
What you need
-
-
Remueva los dos tornillos Phillips #00 de 3.3 mm que sujetan el soporte metálico al ensamblaje del conector Lightning.
-
-
Para volver a montar su dispositivo, siga las instrucciones en orden inverso.
Para volver a montar su dispositivo, siga las instrucciones en orden inverso.
Cancel: I did not complete this guide.
4 other people completed this guide.
Special thanks to these translators:
90%
These translators are helping us fix the world! Want to contribute?
Start translating ›