Fix Your Stuff Community Store

PowerLead Puto PLD003 Side Panel Replacement

Introduction

This guide will show you how to remove the PowerLead Puto PLD003 side panel. Removing the side panel is necessary in order to replace most parts.

What you need

  1. PowerLead Puto PLD003 Side Panel Replacement, Side Panel: step 1, image 1 of 1

    • Slide the battery eject button to open the battery door.

  2. PowerLead Puto PLD003 Side Panel Replacement: step 2, image 1 of 1

    • With the battery door open, carefully unscrew all four 5mm Phillips #1 screws.

  4. PowerLead Puto PLD003 Side Panel Replacement: step 3, image 1 of 1

    • Place the camera so that the underside is facing up.

    • Remove the four 5mm Phillips #1 screws.

  5. PowerLead Puto PLD003 Side Panel Replacement: step 4, image 1 of 1

    • Place the camera on a flat surface with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 162