Introduction
If the UV light bulb in your Philips Sonicare FlexCare Sanitizer needs to be replaced, follow these instructions.
-
-
Before initiating the process, ensure that the sanitizer is not plugged into an outlet. Swing the door open to expose the interior of the sanitizing device.
-
-
-
Grip the sides of the plastic cover that is shielding the circuitry. Pull the cover outward to remove it from the sanitizer.
-
-
-
Squeeze the sides of the guard that is placed over the UV light bulb. Pull the piece outward to remove it.
-
-
-
Before holding the light bulb, ensure that it is not warm due to previous use. Once that is confirmed, take a hold of the light bulb by the threaded surface and rotate it while pulling it outward. Have a compatible UV bulb to replace the old one.
-