Introduction

Use this guide to install a new button cell battery (type CR2032). This battery is used to keep track of time when the device is off or unplugged.

Parts

No parts required.

  1. Orient the console so that the rubber feet are facing up and the exhaust vents are facing you.
    • Orient the console so that the rubber feet are facing up and the exhaust vents are facing you.

    • Unscrew the Phillips #00 screw on battery compartment cover.

      • The screw does not remove from the battery compartment cover.

    Add Comment

  2. Pull out the battery holder and battery.
    • Pull out the battery holder and battery.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

10 other people completed this guide.

Kim Arre

Member since: 01/11/2013

3,156 Reputation

8 Guides authored

Team

iFixit Member of iFixit

Community

114 Members

7,032 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 20

Past 30 Days: 75

All Time: 11,895