Introduction
Back case acts as a door to access change out film. It can be easily removed from the device and replaced if it becomes cracked or otherwise unusable.
-
-
In this guide we will refer to 'left' and 'right' as though the camera is facing away from you.
-
Pull up on the film rewind lever on the top left of the camera to release the back door.
-
Once the door is released, open it completely.
Ask FixBot
-
-
-
-
Locate the silver tab on the inside of the door hinge. Slide this down to free the hinge and remove it from the camera.
-
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 25-26, Garner Spring 2011 Member of Cal Poly, Team 25-26, Garner Spring 2011
CPSU-GARNER-S11S25G26
3 Members
12 Guides authored
