Introduction
- You will need a #00 phillip's head screwdriver and a black spudger (or equivalent tool)
What you need
-
-
Open battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of orange lever. Remove this screw.
-
-
-
Rotate camera to find side panel with lanyard attachment. Detach side panel by lifting bottom corner slightly with the spudger.
-
-
-
Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.
-
-
-
With back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.
-