Introduction

Use this guide to replace the rear case on your Motorola Droid Turbo.

  1. Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

    This di not work; I had to use a blow dryer.

    Caroline Downie - Reply

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Use a plastic opening tool to pry the rear case off of the rest of the device.
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

      • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

Member since: 09/30/2013

72,655 Reputation

84 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 16

All Time: 1,228