Introduction

Use this guide to replace the front-facing camera on your Motorola Droid Turbo.

  1. Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

  2. Use a plastic opening tool to pry the rear case off of the rest of the device. Remove the rear case.
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

  3. Remove the midframe bezel.
    • Remove the midframe bezel.

  4. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  5. Remove the four Torx T5 screws securing the midframe plate.
    • Remove the four Torx T5 screws securing the midframe plate.

  6. Remove the midframe.
    • Remove the midframe.

  7. Use the pointed end of a spudger to flip up the black retaining flap of the front facing camera's ZIF connector. Use the pointed end of a spudger to flip up the black retaining flap of the front facing camera's ZIF connector.
    • Use the pointed end of a spudger to flip up the black retaining flap of the front facing camera's ZIF connector.

  8. Remove the front-facing camera. Remove the front-facing camera.
    • Remove the front-facing camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Luis Arangu

Member since: 01/20/2016

944 Reputation

3 Guides authored

Team

USF Tampa, Team 15-5, Remmell Spring 2016 Member of USF Tampa, Team 15-5, Remmell Spring 2016

USFT-REMMELL-S16S15G5

3 Members

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 1,461