Magic Bullet NutriBullet Base Replacement

You're viewing a previously published version of this guide. View latest version

Jun 16, 2015 - 05:24:22

Jun 16, 2015 - 05:24:22 Jun 16, 2015 - 05:24:20 Mar 09, 2015 - 09:03:13 Mar 09, 2015 - 08:32:58 Mar 05, 2015 - 09:40:39 Mar 05, 2015 - 09:24:08 Mar 05, 2015 - 09:23:08 Mar 04, 2015 - 09:35:24 Mar 04, 2015 - 09:34:29 Feb 19, 2015 - 11:41:12 Feb 19, 2015 - 11:35:11 Feb 19, 2015 - 11:29:06 Feb 19, 2015 - 11:28:06 Feb 19, 2015 - 11:26:56 Feb 19, 2015 - 11:26:56 Feb 19, 2015 - 11:25:46 Feb 19, 2015 - 11:25:29 Feb 19, 2015 - 10:35:12 Feb 19, 2015 - 09:59:33 Feb 13, 2015 - 11:48:18 Feb 13, 2015 - 11:37:55 Feb 13, 2015 - 11:36:43 Feb 13, 2015 - 11:34:26 Feb 13, 2015 - 11:29:00 Feb 13, 2015 - 11:28:05 Feb 13, 2015 - 11:28:05 Feb 13, 2015 - 11:27:57 Feb 13, 2015 - 11:27:56 Feb 13, 2015 - 11:26:11

Newer

Introduction

If you notice any sharp, moving components outside of your NutriBullet base, then use this replacement guide to learn how to remove and replace the base.

What you need

Step 1 Base

Magic Bullet NutriBullet Base Replacement, Base: step 1, image 1 of 1

Unplug the device from the wall and turn the powerbase upside down.

Step 2

Unscrew the four 10mm screws located on the bottom of the powerbase using the Phillips Head #2 Screwdriver.

Step 3

Once the screws are removed, use slight tension to pull the plastic base up.
Make sure the cord does not get caught or frayed by the fan, which is located in the center of the power base.