Introduction
This guide has been updated by iFixit staff! Read the new, official guide here.
What you need
-
-
Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:
-
Red Seven 3 mm Phillips screws.
-
Orange Three 13.5 mm Phillips screws.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
2 Comments
I accidentally disabled my track pad in the system preferences how do I enable it again when the trackpad wont click?