Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Replace the aluminum bottom case in a MacBook Pro 13" Unibody.

  1. Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:
    • Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

  2. Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.
    • Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 43

All Time: 43,232