Mac Pro 2019 Housing Replacement
Last updated on Jan 13, 2020
Views: 6.7K
View statistics:
- Past 24 Hours:
- 7
- Past 7 Days:
- 30
- Past 30 Days:
- 114
- All Time:
- 6,725
Comments: 2
1 comment on steps, 1 guide comment.
Go to guide commentsCompleted: 7 8
7 people have marked this guide "completed." Will you be next?
8 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Follow this guide to remove the metal housing for your Mac Pro in order to access the internals. This simple procedure requires no tools.
The Mac Pro will not turn on when the housing is removed.
-
-
-
Shut down your Mac Pro.
-
Touch the metal housing with a bare hand to discharge any static electricity.
-
Unplug all cables from the Mac Pro, including the power cable.
Ask FixBot
-
-
-
Lift the top latch up from its recess.
-
Twist the latch counter-clockwise until it won't turn anymore—about a quarter-turn.
-
Slowly lift the housing up by the latch.
-
-
-
To reinstall the housing, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
