Introduction
Folge dieser Anleitung, um die metallische Antennenabdeckung deines Mac mini Late 2014 auszutauschen.
What you need
-
-
Die Unterbodenabdeckung wird von drei geschraubten Clips gehalten.
-
Heble in der Nähe der Schrauben, nicht direkt über ihnen.
-
-
-
-
Entferne die folgenden TR6 Schrauben von der Antennenabdeckung:
-
Drei 4,1 mm Schrauben
-
Drei 1,9 mm Schrauben
-
Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.
Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.
Cancel: I did not complete this guide.
10 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
One Comment
Hello
I had really a problem with this instructions! The T6H Screw-Driver in the fixit-kit doesn’t fit in the holes of the 6 screws who hold the cover? Has Apple changes the screws of the macmini 2014, or has the T6H Screw-Driver has to much tolerance while produced!
I need to replace the HDD of the fusion drive! I will need to buy, HighEnd Tools to open my Cover ?!?