Logitech UE MegaBoom Auxiliary Port and micro USB Port Assembly Replacement

Step 1 Outer Mesh




• Locate the ends of the speaker.
• Put a plastic opening tool in-between the rubber end and the mesh.
• Apply a upward force in order to pry open the end.
• Apply this procedure to the other side as well.
• Will take force.
• Using metal tools may permanently mar your device.
Step 2




• Take the Jimmy and pry up the rubber strip that has the volume buttons on it.
• You will hear clicks as it pries up, don't worry.
• Remove all the rubber you pried off.
Step 3

Tool used on this step:
Tweezers
$4.99
Buy
• Use tweezers to lift end of plastic retainer on edge of mesh out of its channel.
• Work the plastic retainer out of the channel all the way around the speaker.
• Be gentle, it is easy to damage the fabric.
• Repeat for other side.
Step 4 Auxiliary Port and micro USB Port
• Apply an upward force with your thumbs to loosen the end cap.
• Grasp the end cap and lift up to seperate it from the base.
Step 5
• Use tweezers or an opening tool to remove the plastic insert on the inside of the rubber seal.
• Push up on the rectangular connector from the bottom to loosen the circuit board.
Step 6
• Now grasp the plastic on the outside of the rubber seal and pull it out by applying an upward force.
• Once the plastic has been removed, pull out the circuit board containing the auxiliary and USB ports.

Author

with 5 other contributors

Oscar Ambriz

Member since: 09/27/17

958 Reputation

6 Guides authored

Badges: 12

• 
• 
• 

+9 more badges

Team

Cal Poly, Team S9-G2, Banghart Fall 2017 Member of Cal Poly, Team S9-G2, Banghart Fall 2017

CPSU-BANGHART-F17S9G2

4 Members

14 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview