Logitech Dual Action Joystick Replacement

You're viewing a previously published version of this guide. View latest version

Jun 17, 2015 - 04:01:07

Feb 22, 2024 - 08:20:16 Feb 20, 2024 - 12:27:01 Feb 20, 2024 - 12:26:57 Feb 20, 2024 - 12:16:10 Feb 20, 2024 - 12:12:51 Feb 20, 2024 - 12:11:59 Feb 14, 2024 - 09:53:35 Feb 14, 2024 - 09:52:53 Jun 07, 2020 - 12:55:38 Jun 07, 2020 - 12:55:38 Jun 17, 2015 - 04:01:07 Jun 17, 2015 - 03:55:35 Jun 17, 2015 - 03:55:12 Jun 17, 2015 - 03:54:41 Mar 17, 2015 - 01:39:18 Mar 17, 2015 - 01:39:05 Mar 17, 2015 - 01:28:25 Mar 17, 2015 - 01:24:08 Mar 17, 2015 - 01:24:01 Mar 17, 2015 - 01:20:26 Mar 17, 2015 - 12:21:40 Mar 12, 2015 - 01:19:51 Mar 10, 2015 - 12:24:47 Feb 26, 2015 - 11:08:29 Feb 26, 2015 - 11:07:53 Feb 26, 2015 - 11:07:22 Feb 20, 2015 - 11:27:12 Feb 20, 2015 - 11:22:02 Feb 20, 2015 - 11:22:02 Feb 20, 2015 - 11:20:32 Feb 20, 2015 - 11:20:31 Feb 20, 2015 - 11:16:59 Feb 20, 2015 - 11:16:58 Feb 20, 2015 - 11:16:35 Feb 20, 2015 - 11:16:35 Feb 20, 2015 - 11:15:58

Newer

What you need

Step 1 Taking out the screws

Logitech Dual Action Joystick Replacement, Taking out the screws: step 1, image 1 of 1

To get into the controller, you will need to unscrew the 7 screws on the back.
You will have to remove the bottom oval sticker to reveal the screw circled in red.

Step 2 Opening the controller

Logitech Dual Action Joystick Replacement, Opening the controller: step 2, image 1 of 3

Logitech Dual Action Joystick Replacement, Opening the controller: step 2, image 2 of 3

Logitech Dual Action Joystick Replacement, Opening the controller: step 2, image 3 of 3

With the screws removed, turn the controller upside down and separate the front end from the back end.
It is likely that the buttons will fall out of place, so as you open the controller, try to keep track of where the pieces go.
There should be the 4 circular buttons labeled 1-4, 4 smaller circular buttons for the D-Pad, and 3 rounded rectangular buttons.

Step 3 Replacing the joystick

Logitech Dual Action Joystick Replacement, Replacing the joystick: step 3, image 1 of 2

Logitech Dual Action Joystick Replacement, Replacing the joystick: step 3, image 2 of 2

With the case off, the joysticks can be removed by pulling them upward.
To put the replacement joystick on, align the hole at the bottom of the joystick with the rectangular peg and gently push down.
Make sure that the cut-out side of the joystick is towards the outsides of the device.