Installing Lenovo Essential G560 Back Panel

You're viewing a previously published version of this guide. View latest version

Jul 31, 2013 - 04:21:11

Jan 28, 2014 - 02:55:42 Sep 04, 2013 - 05:14:30 Jul 31, 2013 - 04:21:11 Mar 08, 2013 - 10:36:51 Mar 08, 2013 - 10:36:47 Mar 08, 2013 - 10:36:12 Mar 08, 2013 - 12:07:14 Feb 22, 2013 - 12:50:57 Feb 15, 2013 - 12:55:37 Feb 12, 2013 - 11:43:08 Feb 07, 2013 - 11:16:44 Feb 07, 2013 - 12:22:13 Feb 01, 2013 - 12:22:58 Feb 01, 2013 - 12:21:06 Feb 01, 2013 - 12:21:05 Feb 01, 2013 - 12:17:19 Feb 01, 2013 - 12:17:18 Feb 01, 2013 - 12:07:54 Feb 01, 2013 - 12:07:53 Feb 01, 2013 - 12:07:05

Newer

Introduction

This guide is only used as a precursor to the hard drive, RAM, and keyboard removal.

What you need

Step 1 Battery

Installing Lenovo Essential G560 Back Panel, Battery: step 1, image 1 of 1

Turn off the computer.
Disconnect the charging cable from the computer.
Failure to unplug the cable could result in electric shock.
Flip the computer upside down.

Step 2

Locate the two switches that lock the battery. Push the right-hand switch outward into the "unlocked" position.

Step 3

Push and hold the left hand switch outward in the "unlocked" position, then gently slide the battery away from the computer.

Step 4 Back Panel

Installing Lenovo Essential G560 Back Panel, Back Panel: step 4, image 1 of 1

Remove the seven 5.3 mm Phillips #1 screws holding the back panel in place.

Step 5

Pull the back panel off using the highlighted tab. The tab should give you enough leverage to pull the panel off smoothly.
If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that all the screws are removed before attempting again.