Introduction

I teach you how to open the laptop to access and change the RAM, hard drive or whatever you need.

Video Overview

Put the laptop facing down
  • Put the laptop facing down

  • Move the left battery safe lock to the right

Add Comment

Slide the right battery safe lock to the left
  • Slide the right battery safe lock to the left

  • This lock is harder than the previous, with this the battery should pop-up.

Add Comment

  • Use a Philips 0 screwdriver

Add Comment

  • Use a straw to take off just enough of the rubber feet of the 4 corners

  • Use a Phillips screwdriver 0

  • Replace each rubber foot in place after removing the screws

  • You will have a total of 10 screws

Add Comment

  • It will go out easily with or without a straw

  • You can check the model number

Add Comment

  • Flip the laptop and open it

  • Use a plastic tool or a straw to separate the pieces of the chassis

Add Comment

  • Flip the laptop and separate the inferior cover of the chassis

  • Hard Drive 2.5" SATA

  • 2 RAM memory slots type DDR4 SO-DIMM

  • CPU Intel 7th generation

  • Active heat sink (fan)

  • Wireless card

  • Watch battery, 3V. CR2030

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Marcos Mora

Member since: 12/17/2017

1 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 22

All Time: 107