LG Intuition Volume Buttons Replacement

Step 1 Battery

• Turn the device so the two bottom screws are shown.
Step 2

• Remove the two 7mm screws holding the back panel of the phone using the P5 bit and magnetic driver.
Step 3
• Carefully use the plastic opening tool to pry the back panel of the phone from the front screen. This will expose the battery and other parts.
Step 4
• Use the Phillips #0 screwdriver to remove the 5mm screw holding the metal bracket that protects the battery's ribbon cable.
Step 5
• Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.
Step 6
• Gently raise the battery from its compartment.
Step 7 Plastic Motherboard Shield
• Remove the thirteen 5mm screws holding the plastic shield covering the motherboard using the Phillips #00 screwdriver.
Step 8
• Carefully use the plastic opening tool to pry the plastic shield from the motherboard. This will expose the motherboard and ribbon cables for each component.
Step 9 Volume Buttons
• Carefully use the plastic opening tool to pry the ribbon cable connecting the battery to the motherboard of the phone.
• Slowly pull the ribbon cable upward releasing the volume buttons from the phone.

Author

with 1 other contributor

Thomas Morrissey

Member since: 10/25/18

616 Reputation

6 Guides authored

Badges: 7

• 
• 
• 

+4 more badges

Team

UMass Dartmouth, Team S3-G4, Peak Fall 2018 Member of UMass Dartmouth, Team S3-G4, Peak Fall 2018

UMASSD-PEAK-F18S3G4

3 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview