Skip to main content

Jura Capresso IMPRESSA J5 opening procedure

What you need

  1. Jura Capresso IMPRESSA J5  opening procedure, Jura Capresso IMPRESSA J5  opening procedure: step 1, image 1 of 1
    • Unplug the power cord!

    • Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

  2. Jura Capresso IMPRESSA J5  opening procedure: step 2, image 1 of 3 Jura Capresso IMPRESSA J5  opening procedure: step 2, image 2 of 3 Jura Capresso IMPRESSA J5  opening procedure: step 2, image 3 of 3
    • Flip open the lid of the bean compartment.

    • Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

    • Remove the bean compartment.

  3. Jura Capresso IMPRESSA J5  opening procedure: step 3, image 1 of 3 Jura Capresso IMPRESSA J5  opening procedure: step 3, image 2 of 3 Jura Capresso IMPRESSA J5  opening procedure: step 3, image 3 of 3
    Tool used on this step:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Buy
    • The top cover is fastened with oval head screws. Unscrew them.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

  4. Jura Capresso IMPRESSA J5  opening procedure: step 4, image 1 of 1
    • Also remove the two oval head screws underneath the ground coffee compartment lid.

  5. Jura Capresso IMPRESSA J5  opening procedure: step 5, image 1 of 1
    • Now you can pry up the top cover all around.

    • Remove the top cover. This often requires a little force.

    • Use plastic tools to avoid scratching your device.

  6. Jura Capresso IMPRESSA J5  opening procedure: step 6, image 1 of 2 Jura Capresso IMPRESSA J5  opening procedure: step 6, image 2 of 2
    • Turn the device with the back facing you.

    • Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

    • Remove the Jura label.

  7. Jura Capresso IMPRESSA J5  opening procedure: step 7, image 1 of 3 Jura Capresso IMPRESSA J5  opening procedure: step 7, image 2 of 3 Jura Capresso IMPRESSA J5  opening procedure: step 7, image 3 of 3
    • Underneath the label you will find two Torx T15 screws. Remove them.

    • Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

  8. Jura Capresso IMPRESSA J5  opening procedure: step 8, image 1 of 1
    • Remove the Torx T15 screw on the side panel with the water tank.

  9. Jura Capresso IMPRESSA J5  opening procedure: step 9, image 1 of 2 Jura Capresso IMPRESSA J5  opening procedure: step 9, image 2 of 2
    • Pull the right side panel slightly towards the back.

    • Remove the side panel.

  10. Jura Capresso IMPRESSA J5  opening procedure: step 10, image 1 of 1
    • Pull the left side panel slightly towards the back and remove it.

Conclusion

Follow the steps in reverse order to reassemble your device.

2 other people completed this guide.

Special thanks to these translators:

de en

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

VauWeh

Member since: 10/19/15

199,721 Reputation

246 Guides authored

Team

Repair is War on Entropy Member of Repair is War on Entropy

Community

24 Members

1,084 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 12

Past 30 Days: 43

All Time: 4,317