Introduction

If your Jabra Evolve2 65 ear cushions have become physically damaged either by being ripped or worn down then you may want to consider replacing them.

Over time the ear cushions will become worn down from movement against the ears. This may cause the audio from the headphones to not sound as clear as it used to be. If you notice a difference in audio because of the ear cushions then you may want to consider replacing your ear cushions.

Another reason why you may want to replace the ear cushions is because they don't look as good as they used to and you just want to replace the ear cushions purely for cosmetic reasons.

What you need

Step 1 Ear Pads

Jabra Evolve2 65 Ear Pads Replacement, Ear Pads: step 1, image 1 of 1

Lay your headphones down on a flat, solid surface.

Edit

Step 2

Insert an opening tool into the seam between the ear pad and driver housing, near the hinge.
Gently pry the ear pad away from the driver housing until it releases.

Edit

Step 3

Pry off the other ear pad in the same manner.

Edit

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.