Parts

No parts required.

  1. Remove plastic outer housing using hands or a standard spudger.
    • Remove plastic outer housing using hands or a standard spudger.

  2. Using your hands, carefully remove outer housing and frame to expose the internal workings of the speaker.
    • Using your hands, carefully remove outer housing and frame to expose the internal workings of the speaker.

    • Remove the 8.9mm Phillips #00 screws on each corner of the driver to be replaced. There are four screws per driver. Be sure to set the screws somewhere safe to ensure they aren’t lost.

    • Remove the 3-pin connector from motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

Daley Drucker

Member since: 02/22/2017

1,804 Reputation

4 Guides authored

Team

USF Tampa, Team S1-G2, Leahy Spring 2017 Member of USF Tampa, Team S1-G2, Leahy Spring 2017

USFT-LEAHY-S17S1G2

5 Members

10 Guides authored

6 Comments

where did you source the drivers from?

Rashid Saad Siddiqui - Reply

hi my flip 3 1 speaker is have give the problem thats not give the clear voice , so i want to change the parts can u help me i am where to buy this parts

manu - Reply

I too want to know where you can buy new drivers. Can't find them online so far...

Johannes - Reply

i need help getting the front speakers only where would i get them???

brian ortiz - Reply

Sir

my flip 3 Both speaker is have give the problem thats not give the clear voice , so i want to change the parts can u help me i am where to buy this parts

Anil Kumar Hembrom - Reply

View Statistics:

Past 24 Hours: 10

Past 7 Days: 101

Past 30 Days: 446

All Time: 7,624